When to use 400 («Bad Request»)

From Wikipedia’s List of HTTP Status Codes:

400 Bad Request:
The request cannot be fulfilled due to bad syntax.

In this case, your client sent you an XML payload that had an invalid zip code, which is a form of invalid syntax; therefore, sending a 400 Bad Request is an appropriate error code to return in this situation.

Servers MAY reject questionable requests (even though
they consist of well-formed XML), for instance, with a 400 (Bad
Request) status code and an optional response body explaining the
problem.

Since your request is well-formed (the XML isn’t bad, it just contains semantically incorrect information) you may reject the content with status code 400. The word *may* suggests that there are other options.

In addition, here are some definitions to assist in the interpretation of status code 422:

  • Syntax errors occur during the parsing of input code, and are caused by grammatically incorrect statements. Typical errors might be an illegal character in the input, a missing operator, two operators in a row, two statements on the same line with no intervening semicolon, unbalanced parentheses, a misplaced reserved word, etc.

  • Semantic errors occur during the execution of the code, after it has been parsed as grammatically correct. These have to do not with how statements are constructed, but with what they mean. Such things as incorrect variable types or sizes, nonexistent variables, subscripts out of range, and the like, are semantic errors.

Your invalid zip code is neither a syntax error nor a semantic error; thus, it’s reasonable to rule out status code 422 as an option.

To answer your question, status code 400 is appropriate; however, you may have other options as well.

Ошибка 400 Bad Request возникает, когда сервер не может понять запрос, отправленный клиентом. В вашем случае это может быть связано с тем, что настройки сервера не соответствуют запросу.

Судя по коду из вашего nginx.conf, вы пытаетесь перенаправить HTTP-запросы на HTTPS-порт с помощью rewrite. Однако вместо этого запросы на порт 8080 проксируются на другой сервер.

Для исправления проблемы с ошибкой 400 вам нужно изменить ваш nginx.conf, чтобы он правильно перенаправлял HTTP-запросы на HTTPS-порт.

Примерно так должно выглядеть ваш nginx.conf:

server {
    listen 80;
    server_name example.com;
    return 301 https://$server_name$request_uri;
}

server {
    listen 443 ssl;
    server_name example.com;

    ssl_certificate /etc/letsencrypt/live/example.com/cert.pem;
    ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;

    location / {
        root /var/www/example.com/;
        index index.html;
    }

    location /server/ {
        resolver 00.000.000.00;
        proxy_pass https://00.000.000.00;
    }
}

Этот конфигурационный файл перенаправляет все запросы на порт 80 (HTTP) на порт 443 (HTTPS) с помощью return 301. Затем он обрабатывает запросы на порт 443 (HTTPS), предоставляя файлы из каталога /var/www/example.com/ для пути / и проксируя запросы на путь /server/ на другой сервер.

Убедитесь, что после внесения изменений вы перезапустили сервер NGINX с помощью команды
sudo systemctl restart nginx.

When to use 400 ("Bad Request")
Что это такое?
Олдскулы наверняка помнят, с каким звуком ошибка 400 отображалась на старых устройствах. А в «Записках невесты программиста» под Bad Request Denied открывалась входная дверь главного героя. На самом деле, все коды, которые начинаются с 4, означают, что проблему надо искать на стороне пользователя.

When to use 400 ("Bad Request")
Как устранить?
Прежде чем писать гневные посты в чат вашего провайдера, когда нет сети, стоит для начала разобраться в причинах ошибки 400. Именно они подскажут, как убрать код ответа со страницы.

В статье рассказывается:

  1. 6 основных причин появления ошибки 400 Bad Request
  2. Как исправить ошибку 400 на стороне пользователя
  3. Что делать, если ошибка 400 на стороне сервера
  4. Профилактика возникновения ошибки 400
  5. When to use 400 ("Bad Request")

    Пройди тест и узнай, какая сфера тебе подходит:
    айти, дизайн или маркетинг.

    Бесплатно от Geekbrains

Содержание
  1. 6 основных причин появления ошибки 400 Bad Request
  2. Проверьте, правильно ли введен адрес сайта
  3. Произведите очистку кэша и файлов cookies
  4. Очистка кэша DNS
  5. Сканирование устройства на вирусы
  6. Обновление сетевых драйверов
  7. Откат последних изменений системы
  8. Уменьшение веса файла
  9. Удаление новых расширений и модулей
  10. Проверка корректной работы со стороны провайдера интернет-услуг
  11. Что делать, если ошибка 400 на стороне сервера
  12. Профилактика возникновения ошибки 400
  13. 1xx informational response
  14. 2xx success
  15. 3xx redirection
  16. 4xx client errors
  17. 5xx server errors
  18. Unofficial codes
  19. Internet Information Services
  20. AWS Elastic Load Balancer
  21. Caching warning codes (obsoleted)
  22. See also
  23. Explanatory notes
  24. References
  25. External links
  26. Чуть подробнее об ошибке 400
  27. Из-за чего всплывает Bad Request?
  28. Читайте также
  29. Исправляем ошибку 400 Bad Request на стороне клиента
  30. Проверяем адрес сайта
  31. Сбрасываем параметры браузера
  32. Загружаем файл подходящего размера
  33. Устраняем проблемы, связанные с Windows и сторонним софтом

6 основных причин появления ошибки 400 Bad Request

Когда сервер не может обработать входящий от пользователя запрос из-за неправильного синтаксиса, HTTP выдает ошибку 400 Bad Request. Найти причину возникновения ошибки зачастую трудно даже внутри управляемой среды разработки, так как код ответа HTTP определяет непростые взаимоотношения между клиентом, сервером и веб-приложением. Часто конфликт возникает сразу с несколькими сторонними веб-сервисами.

400 Bad Request
400 Bad Request

Ошибка 400 возникает по следующим причинам:

  • Допущена опечатка в ссылке. Это может произойти как по вине пользователя при некорректном вводе, так и со стороны владельца сайта, который разместил ссылку на ресурсе. В таком случае сайт выдаст ошибку 404: «Страница не найдена».
  • Файлы cookies устарели.
  • Посетитель сайта загружает файл слишком большого объема.
  • Блокировка ресурса антивирусной системой или брандмауэром.
  • Доступ блокируется вирусом.
  • Со стороны провайдера интернет-услуг наблюдаются проблемы.

Проверьте, правильно ли введен адрес сайта

Неверно указанный URL – самая частая проблема ошибки 400 BAD Request. Рассмотрим на примере доменного имени internet-technologies.ru. Домен второго уровня нечувствителен к регистру, поэтому при написании адреса в формате interNET-technologies.ru страница будет работать идентично с прописанной нижним регистром ссылкой.

Доменная зона первого уровня (ru) чувствительна к регистру, и, если браузер или приложение не переводит символы в нижний регистр перед исполнением запроса, выйдет ошибка HTTP-запроса 400.

Если адрес прописан верно, переходите к поиску других причин. Список подготовили ниже.

Произведите очистку кэша и файлов cookies

Ошибка 400 в ряде случаев возникает из-за некорректных или повторяющихся локальных файлов cookies. Простым языком – это отдельные фрагменты данных, которые хранятся в памяти гаджета и используются для идентификации сайтами или приложениями определенного браузера или устройства. Хранение данных позволяет приложениям опознать клиента для упрощения и ускорения дальнейших посещений пользователем этого ресурса.

Очистка кэша и файлов cookies
Очистка кэша и файлов cookies

Ошибка 400 может возникать из-за конфликта файлов cookies, хранящимися на вашем устройстве или аккаунте, с токеном сессии другого пользователя. В таком случае она всплывает у одного из клиентов.

Однако наиболее часто хватает почистить кэш файлов cookies только на вашем приложении или браузере, который выдает ошибку запроса 400.

pdf иконка

Топ-30 самых востребованных и высокооплачиваемых профессий 2023

Поможет разобраться в актуальной ситуации на рынке труда

doc иконка

Подборка 50+ ресурсов об IT-сфере

Только лучшие телеграм-каналы, каналы Youtube, подкасты, форумы и многое другое для того, чтобы узнавать новое про IT

pdf иконка

ТОП 50+ сервисов и приложений от Geekbrains

Безопасные и надежные программы для работы в наши дни

Уже скачали 20547 pdf иконка

Файлы, содержащие в себе информацию о пользователе, сохраняются на вашем устройстве по принципу доменного имени. Просто и безопасно можно очистить все фалы cookies. Но если вы не хотите чистить кэш полностью и знакомы с ручным удалением, можно почистить только те сессии, которые соответствуют домену сайта с ошибкой.

Очистка кэша DNS

Java-приложения: плюсы и минусы языка

When to use 400 ("Bad Request")

Ниже мы описали 3 простых действия, которые помогут очистить кэш:

  • В поиске на панели задач введите запрос «Командная строка» и откройте появившееся приложение.
  • Наберите команду ipconfig /flushdns
  • При успешной очистке всплывёт сообщение: = 932×270.
  • Настройка антивируса и брандмауэра
Очистка кэша DNS
Очистка кэша DNS

Ошибка установки связи 400 может возникать из-за блокировки сайта антивирусом или брандмауэром. Для проверки необходимо временно отключить программы. Если страница загрузилась, следует поменять настройки защиты вашего устройства.

Сканирование устройства на вирусы

Отсканируйте устройство антивирусом, ведь связь с сайтами может нарушать вредоносная программа. При обнаружении вируса удалите его и перезагрузите устройство. Если ничего не обнаружено попробуйте другой способ.

Обновление сетевых драйверов

Посылать неверные запросы может устаревшее на сетевых устройствах ПО. Для исключения этой ошибки необходимо обновить драйверы для сетевого соединения.

Откат последних изменений системы

Любые обновлённые расширения или модули могут быть причиной появления ошибки на стороне сервера. Здесь может помочь откат к более ранним версиям.

Если ошибка 400 возникла после обновления системы управления контентом, необходимо попробовать выполнить откат к предыдущей версии. Это будет самым лёгким и простым способом её устранения.

Стоит учесть, что на некоторых популярных платформах CMS невозможно откатить до предыдущей версии. Если вы не можете вернуться к использованию более раннего варианта программы, стоит поискать другие методы.

Уменьшение веса файла

Проблема с сервером возникает не только на стороне пользователя. Например, слишком большой файл, загруженный на ресурс, может привести к обрыву соединения.

Для того чтобы не занимать много места на своем сервере, на некоторых сайтах стоят ограничения по объёму файлов, которые загружают пользователи. Если на этапе загрузки вы увидели такой код, скорее всего, файл больше, чем требуется. Для устранения ошибки необходимо уменьшить размер до рекомендуемого.

Удаление новых расширений и модулей

Имена компонентов могут отличаться в зависимости от системы создания и управления сайтом (модули, плагины и т.д.). Все новые расширения улучшают возможности стандартной функциональности используемой платформы.

Однако при ошибке запроса следует удалить недавно установленные модули, так как наряду с улучшением функциональности все расширения могут в полной степени иметь контроль над системой и возможность вносить изменения в базу данных или код PHP, HTML, CSS, JavaScript.

Только до 1.05

When to use 400 ("Bad Request")Тест на определение компетенций

When to use 400 ("Bad Request")Чек-лист «Как избежать обмана при трудоустройстве»

When to use 400 ("Bad Request")Инструкция по выходу из выгорания

Чтобы получить файл, укажите e-mail:

Подтвердите, что вы не робот,
указав номер телефона:

When to use 400 ("Bad Request")
Уже скачали 7503

Проверка корректной работы со стороны провайдера интернет-услуг

Если ошибка сохраняется даже при посещении другого веб-сайта, стоит учесть возможное нарушение работы сетевого оборудования. Для исправления ситуации необходимо перезагрузить маршрутизатор или модем и само устройство, с которого производится выход в сеть.

При неудачных попытках обратитесь к вашему провайдеру: подробное описание ситуации поможет решить проблему. Досконально расскажите о всех предпринятых действиях с указанием операционной системы устройства, используемого браузера, включена ли защита (антивирус и брандмауэр), выполняли ли сканирование на вирусы, производили или нет очистку кэша и куки файлов.

Что делать, если ошибка 400 на стороне сервера

Если проблема не связана с CMS, это значит, что ошибка 400 возникла на стороне сервера. Вот некоторые дополнительные пункты, которые помогут найти решение.

  • Проверить на корректность заголовки HTTP

Если приложение или сервер получают отличные от ожидаемых неверные или недостающие заголовки HTTP, то вы получите ошибку. В таком случае следует выполнить анализ заголовков, которые отправляются на сторону сервера.

Операторы SQL: какие есть и как с ними работать

When to use 400 ("Bad Request")

  • Просмотр логов

Ведение логов на стороне сервера осуществляется практически любым интернет – приложением. Логи – это файлы, которые содержат в себе информацию об истории приложения: на какие страницы был отправлен запрос, к каким серверам и какие результаты выдавала база данных.

Что делать, если ошибка 400 на стороне сервера
Что делать, если ошибка 400 на стороне сервера
  • Отладка скриптов и кода приложения

Если всё вышеперечисленное не дало положительного результата, ещё одной проблемой, почему ошибка 400 не даёт загрузить сайт, может быть исходный код. Он выполняется внутри самого приложения. Для диагностики необходимо будет проверить настройки вручную, одновременно с этим просмотреть логи сервера и приложения.

Ещё раз воспроизведите сценарий шагов, который приводил к появлению ошибки, создав на локальном устройстве копию всего приложения, а после посмотрите код в момент её возникновения.

Исключить повторное появление сбоя соединения поможет инструмент обработки ошибок, который сможет автоматически обнаружить и подать сигнал в момент возникновения таковых. Его внедрение позволит быстро распознать этап появления и ускорить время устранения неполадок.

Профилактика возникновения ошибки 400

Мы подробно рассмотрели, что означает ошибка 400, и дали максимум вариантов для её исключения. Если все перечисленные способы не сработали, то не лишним будет выполнить шаг по очистке системы от мусора, включая реестр. В этом вам поможет программа CCleaner.

  • Для поиска ошибки в реестре запустите программу, далее, после нажатия кнопки «Реестр», выделите все пункты и начните сканирование кнопкой «Поиск проблем».
  • По завершению программа предложит посмотреть выбранные проблемы. Нажмите на эту кнопку. Перед внесением изменений вам будет предложено создать резервную копию реестра. Для перестраховки нажмите «Да». Далее нажимаем на «Исправить отмеченные» после чего ошибки реестра будут успешно исправлены.
  • Для очистки программ от мусора, необходимо открыть раздел «Стандартная очистка» и отметить все пункты компонентов Windows, которые необходимо почистить. Время процесса может отличаться, всё зависит от объема внутреннего хранилища. Обычно это занимает несколько минут. По завершению сканирования нажмите на кнопку «Очистка», выбрав необходимые программы во вкладке «Приложения».

Надеемся, что наш материал вам помог исключить ошибку соединения 400. В любом случае вы проверили все возможные причины её появления и попутно произвели очистку системы от мусора, что позволит избежать появления других проблем на вашем устройстве.

This is a list of Hypertext Transfer Protocol (HTTP) response status codes. Status codes are issued by a server in response to a client’s request made to the server. It includes codes from IETF Request for Comments (RFCs), other specifications, and some additional codes used in some common applications of the HTTP. The first digit of the status code specifies one of five standard classes of responses. The optional message phrases shown are typical, but any human-readable alternative may be provided, or none at all.

Unless otherwise stated, the status code is part of the HTTP standard (RFC 9110).

All HTTP response status codes are separated into five classes or categories. The first digit of the status code defines the class of response, while the last two digits do not have any classifying or categorization role. There are five classes defined by the standard:

  • 1xx informational response – the request was received, continuing process
  • 2xx successful – the request was successfully received, understood, and accepted
  • 3xx redirection – further action needs to be taken in order to complete the request
  • 4xx client error – the request contains bad syntax or cannot be fulfilled
  • 5xx server error – the server failed to fulfil an apparently valid request

1xx informational response

100 Continue
The server has received the request headers and the client should proceed to send the request body (in the case of a request for which a body needs to be sent; for example, a POST request). Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient. To have a server check the request’s headers, a client must send Expect: 100-continue as a header in its initial request and receive a 100 Continue status code in response before sending the body. If the client receives an error code such as 403 (Forbidden) or 405 (Method Not Allowed) then it should not send the request’s body. The response 417 Expectation Failed indicates that the request should be repeated without the Expect header as it indicates that the server does not support expectations (this is the case, for example, of HTTP/1.0 servers).[2]
101 Switching Protocols
The requester has asked the server to switch protocols and the server has agreed to do so.
102 Processing (WebDAV; RFC 2518)
A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request. This code indicates that the server has received and is processing the request, but no response is available yet. [3] This prevents the client from timing out and assuming the request was lost. The status code is deprecated.[4]
103 Early Hints (RFC 8297)
Used to return some response headers before final HTTP message.[5]

2xx success

200 OK
Standard response for successful HTTP requests. The actual response will depend on the request method used. In a GET request, the response will contain an entity corresponding to the requested resource. In a POST request, the response will contain an entity describing or containing the result of the action.
201 Created
The request has been fulfilled, resulting in the creation of a new resource.[6]
202 Accepted
The request has been accepted for processing, but the processing has not been completed. The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
203 Non-Authoritative Information (since HTTP/1.1)
The server is a transforming proxy (e.g. a Web accelerator) that received a 200 OK from its origin, but is returning a modified version of the origin’s response.[7][8]
204 No Content
The server successfully processed the request, and is not returning any content.
205 Reset Content
The server successfully processed the request, asks that the requester reset its document view, and is not returning any content.
206 Partial Content
The server is delivering only part of the resource (byte serving) due to a range header sent by the client. The range header is used by HTTP clients to enable resuming of interrupted downloads, or split a download into multiple simultaneous streams.
207 Multi-Status (WebDAV; RFC 4918)
The message body that follows is by default an XML message and can contain a number of separate response codes, depending on how many sub-requests were made.[9]
208 Already Reported (WebDAV; RFC 5842)
The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response, and are not being included again.
226 IM Used (RFC 3229)
The server has fulfilled a request for the resource, and the response is a representation of the result of one or more instance-manipulations applied to the current instance.[10]

3xx redirection

300 Multiple Choices
Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation). For example, this code could be used to present multiple video format options, to list files with different filename extensions, or to suggest word-sense disambiguation.
301 Moved Permanently
This and all future requests should be directed to the given URI.
302 Found (Previously «Moved temporarily»)
Tells the client to look at (browse to) another URL. The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect with the same method (the original describing phrase was «Moved Temporarily»),[12] but popular browsers implemented 302 redirects by changing the method to GET. Therefore, HTTP/1.1 added status codes 303 and 307 to distinguish between the two behaviours.[11]
303 See Other (since HTTP/1.1)
The response to the request can be found under another URI using the GET method. When received in response to a POST (or PUT/DELETE), the client should presume that the server has received the data and should issue a new GET request to the given URI.
304 Not Modified
Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match. In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
305 Use Proxy (since HTTP/1.1)
The requested resource is available only through a proxy, the address for which is provided in the response. For security reasons, many HTTP clients (such as Mozilla Firefox and Internet Explorer) do not obey this status code.
306 Switch Proxy
No longer used. Originally meant «Subsequent requests should use the specified proxy.»
307 Temporary Redirect (since HTTP/1.1)
In this case, the request should be repeated with another URI; however, future requests should still use the original URI. In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request. For example, a POST request should be repeated using another POST request.
308 Permanent Redirect
This and all future requests should be directed to the given URI. 308 parallel the behaviour of 301, but does not allow the HTTP method to change. So, for example, submitting a form to a permanently redirected resource may continue smoothly.

4xx client errors

400 Bad Request
The server cannot or will not process the request due to an apparent client error (e.g., malformed request syntax, size too large, invalid request message framing, or deceptive request routing).
401 Unauthorized
Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the requested resource. See Basic access authentication and Digest access authentication. 401 semantically means «unauthorised», the user does not have valid authentication credentials for the target resource.
Some sites incorrectly issue HTTP 401 when an IP address is banned from the website (usually the website domain) and that specific address is refused permission to access a website.[]
402 Payment Required
Reserved for future use. The original intention was that this code might be used as part of some form of digital cash or micropayment scheme, as proposed, for example, by GNU Taler,[14] but that has not yet happened, and this code is not widely used. Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.[15] Sipgate uses this code if an account does not have sufficient funds to start a call.[16] Shopify uses this code when the store has not paid their fees and is temporarily disabled.[17] Stripe uses this code for failed payments where parameters were correct, for example blocked fraudulent payments.[18]
403 Forbidden
The request contained valid data and was understood by the server, but the server is refusing action. This may be due to the user not having the necessary permissions for a resource or needing an account of some sort, or attempting a prohibited action (e.g. creating a duplicate record where only one is allowed). This code is also typically used if the request provided authentication by answering the WWW-Authenticate header field challenge, but the server did not accept that authentication. The request should not be repeated.
404 Not Found
The requested resource could not be found but may be available in the future. Subsequent requests by the client are permissible.
405 Method Not Allowed
A request method is not supported for the requested resource; for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
406 Not Acceptable
The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request. See Content negotiation.
407 Proxy Authentication Required
The client must first authenticate itself with the proxy.
408 Request Timeout
The server timed out waiting for the request. According to HTTP specifications: «The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time.»
409 Conflict
Indicates that the request could not be processed because of conflict in the current state of the resource, such as an edit conflict between multiple simultaneous updates.
410 Gone
Indicates that the resource requested was previously in use but is no longer available and will not be available again. This should be used when a resource has been intentionally removed and the resource should be purged. Upon receiving a 410 status code, the client should not request the resource in the future. Clients such as search engines should remove the resource from their indices. Most use cases do not require clients and search engines to purge the resource, and a «404 Not Found» may be used instead.
411 Length Required
The request did not specify the length of its content, which is required by the requested resource.
412 Precondition Failed
The server does not meet one of the preconditions that the requester put on the request header fields.
413 Payload Too Large
The request is larger than the server is willing or able to process. Previously called «Request Entity Too Large» in RFC 2616.[19]
414 URI Too Long
The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request, in which case it should be converted to a POST request. Called «Request-URI Too Long» previously in RFC 2616.[20]
415 Unsupported Media Type
The request entity has a media type which the server or resource does not support. For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
416 Range Not Satisfiable
The client has asked for a portion of the file (byte serving), but the server cannot supply that portion. For example, if the client asked for a part of the file that lies beyond the end of the file. Called «Requested Range Not Satisfiable» previously RFC 2616.[21]
417 Expectation Failed
The server cannot meet the requirements of the Expect request-header field.[22]
418 I’m a teapot (RFC 2324, RFC 7168)
This code was defined in 1998 as one of the traditional IETF April Fools’ jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol, and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by teapots requested to brew coffee.[23] This HTTP status is used as an Easter egg in some websites, such as Google.com’s «I’m a teapot» easter egg.[24][25][26] Sometimes, this status code is also used as a response to a blocked request, instead of the more appropriate 403 Forbidden.[27][28]
421 Misdirected Request
The request was directed at a server that is not able to produce a response (for example because of connection reuse).
422 Unprocessable Entity
The request was well-formed but was unable to be followed due to semantic errors.[9]
423 Locked (WebDAV; RFC 4918)
The resource that is being accessed is locked.[9]
424 Failed Dependency (WebDAV; RFC 4918)
The request failed because it depended on another request and that request failed (e.g., a PROPPATCH).[9]
425 Too Early (RFC 8470)
Indicates that the server is unwilling to risk processing a request that might be replayed.
426 Upgrade Required
The client should switch to a different protocol such as TLS/1.3, given in the Upgrade header field.
428 Precondition Required (RFC 6585)
The origin server requires the request to be conditional. Intended to prevent the ‘lost update’ problem, where a client GETs a resource’s state, modifies it, and PUTs it back to the server, when meanwhile a third party has modified the state on the server, leading to a conflict.[29]
429 Too Many Requests (RFC 6585)
The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.[29]
431 Request Header Fields Too Large (RFC 6585)
The server is unwilling to process the request because either an individual header field, or all the header fields collectively, are too large.[29]
451 Unavailable For Legal Reasons (RFC 7725)
A server operator has received a legal demand to deny access to a resource or to a set of resources that includes the requested resource.[30] The code 451 was chosen as a reference to the novel Fahrenheit 451 (see the Acknowledgements in the RFC).

5xx server errors

The server failed to fulfil a request.

500 Internal Server Error
A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
501 Not Implemented
The server either does not recognize the request method, or it lacks the ability to fulfil the request. Usually this implies future availability (e.g., a new feature of a web-service API).
502 Bad Gateway
The server was acting as a gateway or proxy and received an invalid response from the upstream server.
503 Service Unavailable
The server cannot handle the request (because it is overloaded or down for maintenance). Generally, this is a temporary state.[31]
504 Gateway Timeout
The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
505 HTTP Version Not Supported
The server does not support the HTTP version used in the request.
506 Variant Also Negotiates (RFC 2295)
Transparent content negotiation for the request results in a circular reference.[32]
507 Insufficient Storage (WebDAV; RFC 4918)
The server is unable to store the representation needed to complete the request.[9]
508 Loop Detected (WebDAV; RFC 5842)
The server detected an infinite loop while processing the request (sent instead of 208 Already Reported).
510 Not Extended (RFC 2774)
Further extensions to the request are required for the server to fulfil it.[33]
511 Network Authentication Required (RFC 6585)
The client needs to authenticate to gain network access. Intended for use by intercepting proxies used to control access to the network (e.g., «captive portals» used to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot).[29]

Unofficial codes

419 Page Expired (Laravel Framework)
Used by the Laravel Framework when a CSRF Token is missing or expired.
420 Method Failure (Spring Framework)
A deprecated response used by the Spring Framework when a method has failed.[34]
420 Enhance Your Calm (Twitter)
Returned by version 1 of the Twitter Search and Trends API when the client is being rate limited; versions 1.1 and later use the 429 Too Many Requests response code instead.[35] The phrase «Enhance your calm» comes from the 1993 movie Demolition Man, and its association with this number is likely a reference to cannabis.[]
430 Request Header Fields Too Large (Shopify)
Used by Shopify, instead of the 429 Too Many Requests response code, when too many URLs are requested within a certain time frame.[36]
450 Blocked by Windows Parental Controls (Microsoft)
The Microsoft extension code indicated when Windows Parental Controls are turned on and are blocking access to the requested webpage.[37]
498 Invalid Token (Esri)
Returned by ArcGIS for Server. Code 498 indicates an expired or otherwise invalid token.[38]
499 Token Required (Esri)
Returned by ArcGIS for Server. Code 499 indicates that a token is required but was not submitted.[38]
509 Bandwidth Limit Exceeded (Apache Web Server/cPanel)
The server has exceeded the bandwidth specified by the server administrator; this is often used by shared hosting providers to limit the bandwidth of customers.[39]
529 Site is overloaded
Used by Qualys in the SSLLabs server testing API to signal that the site can’t process the request.[40]
530 Site is frozen
Used by the Pantheon Systems web platform to indicate a site that has been frozen due to inactivity.[41]
598 (Informal convention) Network read timeout error
Used by some HTTP proxies to signal a network read timeout behind the proxy to a client in front of the proxy.[42]
599 Network Connect Timeout Error
An error used by some HTTP proxies to signal a network connect timeout behind the proxy to a client in front of the proxy.

Internet Information Services

Microsoft’s Internet Information Services (IIS) web server expands the 4xx error space to signal errors with the client’s request.

440 Login Time-out
The client’s session has expired and must log in again.[43]
449 Retry With
The server cannot honour the request because the user has not provided the required information.[44]
451 Redirect
Used in Exchange ActiveSync when either a more efficient server is available or the server cannot access the users’ mailbox.[45] The client is expected to re-run the HTTP AutoDiscover operation to find a more appropriate server.[46]

444 No Response
Used internally[50] to instruct the server to return no information to the client and close the connection immediately.
494 Request header too large
Client sent too large request or too long header line.
495 SSL Certificate Error
An expansion of the 400 Bad Request response code, used when the client has provided an invalid client certificate.
496 SSL Certificate Required
An expansion of the 400 Bad Request response code, used when a client certificate is required but not provided.
497 HTTP Request Sent to HTTPS Port
An expansion of the 400 Bad Request response code, used when the client has made a HTTP request to a port listening for HTTPS requests.
499 Client Closed Request
Used when the client has closed the request before the server could send a response.

520 Web Server Returned an Unknown Error
The origin server returned an empty, unknown, or unexpected response to Cloudflare.[52]
521 Web Server Is Down
The origin server refused connections from Cloudflare. Security solutions at the origin may be blocking legitimate connections from certain Cloudflare IP addresses.
522 Connection Timed Out
Cloudflare timed out contacting the origin server.
523 Origin Is Unreachable
Cloudflare could not reach the origin server; for example, if the DNS records for the origin server are incorrect or missing.
524 A Timeout Occurred
Cloudflare was able to complete a TCP connection to the origin server, but did not receive a timely HTTP response.
525 SSL Handshake Failed
Cloudflare could not negotiate a SSL/TLS handshake with the origin server.
526 Invalid SSL Certificate
Cloudflare could not validate the SSL certificate on the origin web server. Also used by Cloud Foundry‘s gorouter.
527 Railgun Error
Error 527 indicates an interrupted connection between Cloudflare and the origin server’s Railgun server.[53]
530
Error 530 is returned along with a 1xxx error.[54]

AWS Elastic Load Balancer

Amazon‘s Elastic Load Balancing adds a few custom return codes

460
Client closed the connection with the load balancer before the idle timeout period elapsed. Typically when client timeout is sooner than the Elastic Load Balancer’s timeout.[55]
463
The load balancer received an X-Forwarded-For request header with more than 30 IP addresses.[55]
561 Unauthorized
An error around authentication returned by a server registered with a load balancer. You configured a listener rule to authenticate users, but the identity provider (IdP) returned an error code when authenticating the user.[56]

Caching warning codes (obsoleted)

110 Response is Stale
The response provided by a cache is stale (the content’s age exceeds a maximum age set by a Cache-Control header or heuristically chosen lifetime).
111 Revalidation Failed
The cache was unable to validate the response, due to an inability to reach the origin server.
112 Disconnected Operation
The cache is intentionally disconnected from the rest of the network.
113 Heuristic Expiration
The cache heuristically chose a freshness lifetime greater than 24 hours and the response’s age is greater than 24 hours.
199 Miscellaneous Warning
Arbitrary, non-specific warning. The warning text may be logged or presented to the user.
214 Transformation Applied
Added by a proxy if it applies any transformation to the representation, such as changing the content encoding, media type or the like.
299 Miscellaneous Persistent Warning
Same as 199, but indicating a persistent warning.

See also

Explanatory notes

  1. Emphasised words and phrases such as must and should represent interpretation guidelines as given by RFC 2119

References

  1. ^ a b c «Hypertext Transfer Protocol (HTTP) Status Code Registry». Iana.org. Archived from the original on December 11, 2011. Retrieved January 8, 2015.
  2. ^ Fielding, Roy T. «RFC 9110: HTTP Semantics and Content, Section 10.1.1 «Expect»«.
  3. ^ Goland, Yaronn; Whitehead, Jim; Faizi, Asad; Carter, Steve R.; Jensen, Del (February 1999). HTTP Extensions for Distributed Authoring – WEBDAV. IETF. doi:10.17487/RFC2518. RFC 2518. Retrieved October 24, 2009.
  4. ^ «102 Processing — HTTP MDN». 102 status code is deprecated
  5. ^ Oku, Kazuho (December 2017). An HTTP Status Code for Indicating Hints. IETF. doi:10.17487/RFC8297. RFC 8297. Retrieved December 20, 2017.
  6. ^ Stewart, Mark; djna. «Create request with POST, which response codes 200 or 201 and content». Stack Overflow. Archived from the original on October 11, 2016. Retrieved October 16, 2015.
  7. ^ «RFC 9110: HTTP Semantics and Content, Section 15.3.4».
  8. ^ «RFC 9110: HTTP Semantics and Content, Section 7.7».
  9. ^ a b c d e Dusseault, Lisa, ed. (June 2007). HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV). IETF. doi:10.17487/RFC4918. RFC 4918. Retrieved October 24, 2009.
  10. ^ Delta encoding in HTTP. IETF. January 2002. doi:10.17487/RFC3229. RFC 3229. Retrieved February 25, 2011.
  11. ^ a b «RFC 9110: HTTP Semantics and Content, Section 15.4 «Redirection 3xx»«.
  12. ^ Berners-Lee, Tim; Fielding, Roy T.; Nielsen, Henrik Frystyk (May 1996). Hypertext Transfer Protocol – HTTP/1.0. IETF. doi:10.17487/RFC1945. RFC 1945. Retrieved October 24, 2009.
  13. ^ «The GNU Taler tutorial for PHP Web shop developers 0.4.0». docs.taler.net. Archived from the original on November 8, 2017. Retrieved October 29, 2017.
  14. ^ «Google API Standard Error Responses». 2016. Archived from the original on May 25, 2017. Retrieved June 21, 2017.
  15. ^ «Sipgate API Documentation». Archived from the original on July 10, 2018. Retrieved July 10, 2018.
  16. ^ «Shopify Documentation». Archived from the original on July 25, 2018. Retrieved July 25, 2018.
  17. ^ «Stripe API Reference – Errors». stripe.com. Retrieved October 28, 2019.
  18. ^ «RFC2616 on status 413». Tools.ietf.org. Archived from the original on March 7, 2011. Retrieved November 11, 2015.
  19. ^ «RFC2616 on status 414». Tools.ietf.org. Archived from the original on March 7, 2011. Retrieved November 11, 2015.
  20. ^ «RFC2616 on status 416». Tools.ietf.org. Archived from the original on March 7, 2011. Retrieved November 11, 2015.
  21. ^ TheDeadLike. «HTTP/1.1 Status Codes 400 and 417, cannot choose which». serverFault. Archived from the original on October 10, 2015. Retrieved October 16, 2015.
  22. ^ Larry Masinter (April 1, 1998). Hyper Text Coffee Pot Control Protocol (HTCPCP/1.0). doi:10.17487/RFC2324. RFC 2324. Any attempt to brew coffee with a teapot should result in the error code «418 I’m a teapot». The resulting entity body MAY be short and stout.
  23. ^ I’m a teapot
  24. ^ Barry Schwartz (August 26, 2014). «New Google Easter Egg For SEO Geeks: Server Status 418, I’m A Teapot». Search Engine Land. Archived from the original on November 15, 2015. Retrieved November 4, 2015.
  25. ^ «Google’s Teapot». Retrieved October 23, 2017.[dead link]
  26. ^ «Enable extra web security on a website». DreamHost. Retrieved December 18, 2022.
  27. ^ «I Went to a Russian Website and All I Got Was This Lousy Teapot». PCMag. Retrieved December 18, 2022.
  28. ^ a b c d Nottingham, M.; Fielding, R. (April 2012). «RFC 6585 – Additional HTTP Status Codes». Request for Comments. Internet Engineering Task Force. Archived from the original on May 4, 2012. Retrieved May 1, 2012.
  29. ^ Bray, T. (February 2016). «An HTTP Status Code to Report Legal Obstacles». ietf.org. Archived from the original on March 4, 2016. Retrieved March 7, 2015.
  30. ^ alex. «What is the correct HTTP status code to send when a site is down for maintenance?». Stack Overflow. Archived from the original on October 11, 2016. Retrieved October 16, 2015.
  31. ^ Holtman, Koen; Mutz, Andrew H. (March 1998). Transparent Content Negotiation in HTTP. IETF. doi:10.17487/RFC2295. RFC 2295. Retrieved October 24, 2009.
  32. ^ Nielsen, Henrik Frystyk; Leach, Paul; Lawrence, Scott (February 2000). An HTTP Extension Framework. IETF. doi:10.17487/RFC2774. RFC 2774. Retrieved October 24, 2009.
  33. ^ «Enum HttpStatus». Spring Framework. org.springframework.http. Archived from the original on October 25, 2015. Retrieved October 16, 2015.
  34. ^ «Twitter Error Codes & Responses». Twitter. 2014. Archived from the original on September 27, 2017. Retrieved January 20, 2014.
  35. ^ «HTTP Status Codes and SEO: what you need to know». ContentKing. Retrieved August 9, 2019.
  36. ^ «Screenshot of error page». Archived from the original (bmp) on May 11, 2013. Retrieved October 11, 2009.
  37. ^ a b «Using token-based authentication». ArcGIS Server SOAP SDK. Archived from the original on September 26, 2014. Retrieved September 8, 2014.
  38. ^ «HTTP Error Codes and Quick Fixes». Docs.cpanel.net. Archived from the original on November 23, 2015. Retrieved October 15, 2015.
  39. ^ «SSL Labs API v3 Documentation». github.com.
  40. ^ «Platform Considerations | Pantheon Docs». pantheon.io. Archived from the original on January 6, 2017. Retrieved January 5, 2017.
  41. ^ «HTTP status codes — ascii-code.com». www.ascii-code.com. Archived from the original on January 7, 2017. Retrieved December 23, 2016.
  42. ^
    «Error message when you try to log on to Exchange 2007 by using Outlook Web Access: «440 Login Time-out»«. Microsoft. 2010. Retrieved November 13, 2013.
  43. ^ «2.2.6 449 Retry With Status Code». Microsoft. 2009. Archived from the original on October 5, 2009. Retrieved October 26, 2009.
  44. ^ «MS-ASCMD, Section 3.1.5.2.2». Msdn.microsoft.com. Archived from the original on March 26, 2015. Retrieved January 8, 2015.
  45. ^ «Ms-oxdisco». Msdn.microsoft.com. Archived from the original on July 31, 2014. Retrieved January 8, 2015.
  46. ^ «The HTTP status codes in IIS 7.0». Microsoft. July 14, 2009. Archived from the original on April 9, 2009. Retrieved April 1, 2009.
  47. ^ «ngx_http_request.h». nginx 1.9.5 source code. nginx inc. Archived from the original on September 19, 2017. Retrieved January 9, 2016.
  48. ^ «ngx_http_special_response.c». nginx 1.9.5 source code. nginx inc. Archived from the original on May 8, 2018. Retrieved January 9, 2016.
  49. ^ «return» directive Archived March 1, 2018, at the Wayback Machine (http_rewrite module) documentation.
  50. ^ «Troubleshooting: Error Pages». Cloudflare. Archived from the original on March 4, 2016. Retrieved January 9, 2016.
  51. ^ «Error 520: web server returns an unknown error». Cloudflare.
  52. ^ «527 Error: Railgun Listener to origin error». Cloudflare. Archived from the original on October 13, 2016. Retrieved October 12, 2016.
  53. ^ «Error 530». Cloudflare. Retrieved November 1, 2019.
  54. ^ a b «Troubleshoot Your Application Load Balancers – Elastic Load Balancing». docs.aws.amazon.com. Retrieved August 27, 2019.
  55. ^ «Troubleshoot your Application Load Balancers — Elastic Load Balancing». docs.aws.amazon.com. Retrieved January 24, 2021.
  56. ^ «Hypertext Transfer Protocol (HTTP/1.1): Caching». datatracker.ietf.org. Retrieved September 25, 2021.
  57. ^ «Warning — HTTP | MDN». developer.mozilla.org. Retrieved August 15, 2021.   Some text was copied from this source, which is available under a Creative Commons Attribution-ShareAlike 2.5 Generic (CC BY-SA 2.5) license.
  58. ^ «RFC 9111: HTTP Caching, Section 5.5 «Warning»«. June 2022.
  • «RFC 9110: HTTP Semantics and Content, Section 15 «Status Codes»«.
  • Hypertext Transfer Protocol (HTTP) Status Code Registry at the Internet Assigned Numbers Authority
  • MDN status code reference at mozilla.org



host: 123.45.56
user-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.8) Название приложения
content-type: multipart/form-data; boundary=5873ed5c762ec
content-length: 432929

Заголовки от приложения, запрос с которыми не проходит:

host: 123.45.56
user-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.8) Название приложения
accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
accept-language: en-us,en;q=0.5
accept-encoding: gzip,deflate
accept-charset: windows-1251,utf-8;q=0.7,*;q=0.7
keep-alive: 300
connection: keep-alive
content-type: multipart/form-data; boundary=---------------------------587132587349317
content-length: 300000
user www-data;
worker_processes auto;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;

events {
        worker_connections 768;
        # multi_accept on;
}

http {
        sendfile on;
        tcp_nopush on;
        tcp_nodelay on;
        keepalive_timeout 65;
        types_hash_max_size 2048;
        # server_tokens off;

        include /etc/nginx/mime.types;
        default_type application/octet-stream;

        access_log /var/log/nginx/access.log;
        error_log /var/log/nginx/error.log;

        gzip on;
        gzip_disable "msie6";

        include /etc/nginx/conf.d/*.conf;
        include /etc/nginx/sites-enabled/*;
}
server {
    charset utf-8;
    client_max_body_size 128M;

    client_header_buffer_size 4k;
    large_client_header_buffers 8 16k;

    listen 80 default_server;

    server_name "";
    root        /home/user/www/web/domain.ru;
    index       index.php index.html index.htm;

    access_log  /home/user/www/log/access.log;
    error_log   /home/user/www/log/error.log;

    location / {
        try_files $uri $uri/ /index.php$is_args$args;
    }

    location ~ \.(js|css|png|jpg|gif|swf|ico|mov|fla|zip|rar)$ {
        try_files $uri =404;
    }

    location ~ \.php$ {
        include fastcgi_params;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_pass unix:/run/php/php-fpm.sock;
        proxy_read_timeout 600;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $remote_addr;
        fastcgi_param PHP_VALUE "sendmail_path=/usr/sbin/sendmail -t -i -f user@domain.ru";
        fastcgi_param PHP_ADMIN_VALUE "open_basedir=/home/user/www/:.";
        fastcgi_param PHP_ADMIN_VALUE "upload_tmp_dir=/home/user/www/tmp";
        fastcgi_param PHP_ADMIN_VALUE "session.save_path=/home/user/www/tmp";
        fastcgi_param PHP_ADMIN_VALUE "display_errors=On";
        try_files $uri =404;
    }
}

Ошибка 400 Bad Request «the plain http request was sent to https port» на Nginx довольно распространенная проблема, когда вы пытаетесь настроить Nginx для обработки запросов http и https + сертификат SSL. Как получить бесплатный сертификат  Let’s Encrypt, мы рассказывали в статье.

Данной инструкцией объясню причину и решение, что бы запросы к сайту Nginx отрабатывал корректно.
Перейдем к конфигурационному файлу Nginx. В CentOS, обычно, конфиг расположен в директории /etc/nginx/conf.d/. В Ubuntu и Debian — в директории /etc/nginx/sites-enabled/. Во FreeBSD в  /etc/nginx/nginx.conf. . Выглядит конфиг nginx у вас примерно так (убрал лишнюю информацию, что бы не нагружать):

server {
listen 80;
listen 443;
server_name adminwin.ru www.adminwin.ru;
root /home/myhome/app/public;
passenger_enabled on;

# Конфиги SSL / TLS
ssl on;
ssl_certificate /opt/nginx/ssl_keys/ssl.crt;
ssl_certificate_key /opt/nginx/ssl_keys/ssl.key;
....
}

проблема данного конфигурационного файла nginx в том, что при обращении по 80 порт (HTTP) на ваш сайт, веб сервер ожидает использование SSL, который должен использоваться только при обращении н 443 порт (HTTPS).
Исправим конфиг, закомментировав в нем строку с командой «ssl on;» или изменив команду на «ssl off;» и приведем его в следующий вид:

server {
listen 80;
listen 443;
server_name adminwin.ru www.adminwin.ru;
root /home/myhome/app/public;
passenger_enabled on;

# Конфиги SSL / TLS
#ssl on;
ssl off;
ssl_certificate /opt/nginx/ssl_keys/ssl.crt;
ssl_certificate_key /opt/nginx/ssl_keys/ssl.key;
....
}

Теперь у нас сайт по 80 порту (HTTP) открывается, а по 443 (HTTPS) не доступен.
Получается, что полностью исключить или включить ssl мы не можем, но можем указать конкретно использование ssl только для 443 портов (HTTPS).
Исправный конфиг будет выглядеть следующим образом:

server {
listen 80;
listen 443 default ssl;
server_name adminwin.ru www.adminwin.ru;
root /home/myhome/app/public;
passenger_enabled on;

# Конфиги SSL / TLS
#ssl on;
ssl_certificate /opt/nginx/ssl_keys/ssl.crt;
ssl_certificate_key /opt/nginx/ssl_keys/ssl.key;
....
}

В конечном конфиге Nginx мы явно указали использовать SSL для 443 запросов на сайт строчкой «listen 443 default ssl;«, в некоторых версиях срабатывает «listen 443 ssl;»

Напишите в комментариях, помогла статья решить проблему с ошибкой «Обычный HTTP-запрос был отправлен на HTTPS-порт» или нет.


I made this function to make it possible to send announcements to my google home mini but im getting error code 400 (Bad Request) nonstop. I tried using multiple approaches to this.

In Home-Assistant, i have setup my Google Home and can play media through it but whenever i try it with the «google_say» API of Home-Assistant it doesn’t work.

I also tried calling the Home-Assistant API over my Phone using an App called «API Client» but i got the same response.

    function ttsGoogleHome(text) {
    var ttsUrl = "http://127.0.0.1:8123/api/services/tts/google_say?api_password=<MY_PASSWORD>"
    var varToken = "<MY_TOKEN>"
    
    var postData = {"entity_id": "media_player.david", "message": `${text}`};
  
      let axiosConfig = {
        headers: {
            'authorization': `Bearer ${varToken}`,
            'Content-Type': 'application/json',
            "Access-Control-Allow-Origin": "*",
        }
      };
  
      axios.post(ttsUrl, postData, axiosConfig)
      .then((res) => {
        console.log("RESPONSE RECEIVED: ", JSON.stringify(res));
      })
      .catch((err) => {
        console.log("AXIOS ERROR: ", JSON.stringify(err));
      })
    }

This is the response i get in the server:

        {
          "message": "Request failed with status code 400",
          "name": "Error",
          "stack": "Error: Request failed with status code 400\n    
    at createError (/home/pi/nodejs/node_modules/axios/lib/core/createError.js:16:15)\n    
    at settle (/home/pi/nodejs/node_modules/axios/lib/core/settle.js:17:12)\n    
    at IncomingMessage.handleStreamEnd (/home/pi/nodejs/node_modules/axios/lib/adapters/http.js:260:11)\n    
    at IncomingMessage.emit (events.js:388:22)\n    
    at endReadableNT (internal/streams/readable.js:1336:12)\n    
    at processTicksAndRejections (internal/process/task_queues.js:82:21)",
          "config": {
            "url": "http://127.0.0.1:8123/api/services/tts/google_say?api_password=<MY_PASSWORD>",
            "method": "post",
            "data": "{\"entity_id\":\"media_player.david\",\"message\":\"Erste Stunde  Fach Deutsch Lehrer Schemmer Raum Schemmer\"}",
            "headers": {
              "Accept": "application/json, text/plain, */*",
              "Content-Type": "application/json;charset=UTF-8",
              "authorization": "Bearer <MY_TOKEN>",
              "Access-Control-Allow-Origin": "*",
              "User-Agent": "axios/0.21.1",
              "Content-Length": 103
            },
            "transformRequest": [
              null
            ],
            "transformResponse": [
              null
            ],
            "timeout": 0,
            "xsrfCookieName": "XSRF-TOKEN",
            "xsrfHeaderName": "X-XSRF-TOKEN",
            "maxContentLength": -1,
            "maxBodyLength": -1
          }
        }

Раздражает, когда какой-то сайт не загружается и отзывается непонятными ошибками. Обычно они сопровождаются одним из десятков HTTP-кодов, которые как раз намекают на характер сбоя, а также его вероятные причины. 

В этом материале поговорим об ошибке 400 Bad Request. Почему она появляется и как ее исправить. 

Чуть подробнее об ошибке 400

Как и другие коды, начинающиеся на четверку, 400 Bad Request говорит о том, что возникла проблема на стороне пользователя. Зачастую сервер отправляет ее, когда появившаяся неисправность не подходит больше ни под одну категорию ошибок. 

Стоит запомнить — код 400 напрямую связан с клиентом (браузером, к примеру) и намекает на то, что отправленный запрос со стороны пользователя приводит к сбою еще до того, как его обработает сервер (вернее, так считает сам сервер). 

Комьюнити теперь в Телеграм

Подпишитесь и будьте в курсе последних IT-новостей

Из-за чего всплывает Bad Request?

  1. Некорректно настроенные HTTP-заголовки в запросе со стороны клиента. Некоторые приложения и сайты мониторят заголовки на предмет наличия в них чего-нибудь подозрительного. Если ваш запрос не соответствует ожиданиям сервера, то высока вероятность появления ошибки 400 (но это не всегда вина пользователя).
  2. Такой же сбой появляется, если клиент пытается загрузить на сервер файл слишком большого размера. Это происходит, потому что на большинстве сайтов есть ограничения по размеру загружаемых данных. Причем ограничение может быть как в 2 гигабайта, так и в 600 килобайт.
  3. Еще ошибка 400 появляется, когда пользователь пытается получить доступ к несуществующей странице. То есть в браузер банально ввели ссылку с опечаткой, некорректным доменом или поддоменом.
  4. Устаревшие или измененные куки-файлы. Сервер может воспринять подмену куки-файлов как попытку атаковать или воспользоваться дырой в безопасности. Поэтому такие запросы сходу блокируются.

Читайте также

Ошибка сервера 401

Ошибка 502 Bad Gateway Error

Исправляем ошибку 400 Bad Request на стороне клиента

Так как ошибка 400 в 99 случаев из 100 возникает на стороне клиента, начнем с соответствующих методов. Проверим все элементы, участвующие в передаче запроса со стороны клиента (браузера).

Проверяем адрес сайта

Банальщина, но необходимая банальщина. Перед тем как бежать куда-то жаловаться и предпринимать более серьезные шаги, повнимательнее взгляните на ссылку в адресной строке. Может, где-то затесалась опечатка или вы случайно написали большую букву вместо маленькой. Некоторые части адреса чувствительны к регистру. 

А еще стоит поискать запрашиваемую страницу через поисковик, встроенный в сайт. Есть вероятность, что конкретная страница куда-то переехала, но сервер не может показать подходящий HTTP-код в духе 404 Not Found. Если, конечно, сам сайт работает. 

Сбрасываем параметры браузера

Этот метод срабатывает, если сервер отказывается принимать запросы из-за «битых» куки или других данных. Дело в том, что сайт использует куки-файлы, чтобы хранить информацию о пользователе у него же в браузере. При входе конкретного человека на ресурс, он пытается распознать куки и сравнить информацию с той, что уже есть на сервере.

Иногда случается, что куки-файлы одного или нескольких пользователей вступают в конфликт. В таком случае надо открыть настройки браузера, а потом удалить весь кэш, куки и прочие связанные элементы. 

В зависимости от браузера процесс удаления куки-файлов может немного отличаться. В Chrome это работает так:

  • Открываем настройки браузера. 
  • Переходим в раздел «Конфиденциальность и безопасность».
  • Выбираем «Файлы cookie и другие данные».
  • Нажимаем на кнопку «Удалить все».Удаление кукис в Google Chrome

Для чистки cookies можно использовать стороннюю программу в духе CCleanerCleanMyPC

Загружаем файл подходящего размера

Если ошибка 400 Bad Request появляется при попытке загрузить на сайт какой-нибудь файл, то стоит попробовать загрузить файл поменьше. Иногда вебмастера ленятся грамотно настроить ресурс, и вместо понятного объяснения вроде «Загружаемые файлы не должны быть размером больше 2 мегабайт» люди получают Bad Request. Остается только гадать, какой там у них лимит. 

Устраняем проблемы, связанные с Windows и сторонним софтом

Помимо браузера, на работу сети могут влиять другие программные продукты (экраны, защищающие от «непонятных подключений»). И вирусы. Да и сама Windows может стать проблемой. Почти любой ее компонент. Поэтому надо бы проделать следующее:

  • NET.Framework. Желательно перед этим удалить предыдущую версию.
  • Установить какой-нибудь приличный антивирус (а лучше два) и запустить глубокую проверку систему. Возможно, подключению и входу на ресурс мешает вредоносная программа.
  • Если у вас уже установлен антивирус, то, наоборот, попробуйте его отключить. Иногда встроенные в них экраны проверки подключений блокируют работу браузера целиком или отдельных страниц. Лучше выдать браузеру больше прав на выполнение своих задач или установить антивирус, который более лояльно относится к установленному на компьютере софту.
  • Еще надо поменять параметры брандмауэра. Его можно разыскать в панели управления Windows. Там надо добавить в список исключений ваш браузер. Тогда брандмауэр не будет мешать подключению к запрашиваемому сайту.
  • Почистить Windows от программного мусора. Можно пройтись приложением CCleaner. 
  • Обновить драйверы для сетевых устройств. 
  • или просканировать систему на наличие погрешностей в системных компонентах.
Читайте также:  Получите эксклюзивные скидки на бриллианты Zimbra для сотрудников почтового отделения
Оцените статью
Хостинги